Lutron DW-6095 3 Phase Power Analyzer with Harmonic, SD Card

\nSD Card real time data recorder\n3 PHASE POWER ANALYZER, with harmonic measurement\nModel : DW-6095\n* Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W.\n* 3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary.\n* Current probe input signal/ranges with selection :\n Input signal ( ACV ) : 200 mV/300 mV/500 mV/1 V/2 V/3 V.\n Ranges ( ACA ) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A /6000A.\n* Meter can cooperate the universal current probes.\n* Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe ( CP 1201 ), AC to DC 9V adapter, 2 G SD memory card and Carrying bag.\n* Measurement :\n V ( phase-to-phase ), V ( phase-to-ground )\n A ( phase-to-ground )\n KW / KVA / KVAR / PF ( phase )\n KW / KVA / KVAR / PF ( system )\n KWH / KVAH / KVARH / PFH ( system )\n Phase angle\n* Harmonics display ( 1-50th order ).\n* Simultaneous display of Harmonics and Wave form.\n* Display of Wave form with Peak Values.\n* Analysis of Total Harmonic Distortion ( THD ).\n* Graphic Phase diagram with 3-Phase system parameters.\n* 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor.\n* Calculated Unbalanced Current through Neutral Line ( An ).\n* Capture Transient events ( including Dip, Swell and Outage ) with programmable threshold ( % ).\n* Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to 1000 ).\n* ACV input impedance is 10 Mega ohms.\n* Safety Standard : IEC 1010, CAT III 600V.\n* Built-in clock and Calendar, real time data record with SD memory card , sampling time can be set from 2 to 7200 seconds. \n Just slot the SD card into the computer, all the measured values with the time information ( year, month, data, hour, minute, second ) \n can be downloaded to the Excel directly, then user can make the further data analysis by themselves.\n* Powered by AA ( UM-3 ) DC 1.5 V X 8 batteries ( Alkaline type ) or DC 9V adapter.\n* Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition software, SW-U811, SW-E802.\n* Optional current probes : CP-1201, CP-200, CP-2000, CP-2011, CP-3000, CP-3001, CP-6001, CPF-3002 detailed specification, refer to page 59-61, 63.\n* User can order the meter only ( without the current probes ) with the special request if intend to cooperate their own current probes.\n* Patented.\n