Prodigit 3311F DC Electronic Load (60V/60A, 300W)

\n3310 Series (75W~350W) DC Electronic Load \nModel: 3310F (60V/30A, 150W)\nModel: 3311F (60V/60A, 300W)\nModel: 3312F (250V/12A, 300W)\nModel: 3314F (500V/12A, 300W)\nModel: 3315F (60V/15A, 75W)\nModel: 3310F-04 (120V/30A, 150W)\nModel: 3311F-04 (60V/60A, 330W)\nModel: 3311F-05 (120V/60A, 300W)\nModel: 3311F-16 (80V/70A, 350W)\nModel: 3312F -02 (250V/12A, 330W)\nModel: 3314F -02 (500V/12A, 330W)\n\nDESCRIPTIONS\n• Each 3310F Series module has its own control and display panel, CC/CR/CV/CP/Dynamic modes, plug in 3300F with 150 sets Store/Recall memory which provides load set-up more efficiently, also can be controlled intranet via RS232,Ethernet,USB and GPIB interface.\n• SHORT time setting and SHORT_VH, SHORT_VL setting function,also can measure Short Voltage and Current.\n• Dynamic can be simulated under CC, CP mode. The current Rise/Fall slew rate can be adjusted individually and \n there is an external signal input so that load can have a simulated Arbitrary Waveform.\n• The additional OCP, OPP test function operated by both mainframe and module that will be more efficiency and accuracy on OCP, OPP testing.\n• Programmable Load ON/OFF voltage, GO/NG meter check, Voltage meter display '' + '' or '' -'' is selectable and 150 sets Store/Recall larger memory is much advance feature for each different application.\n•150 sets test parameter and status storage function can call the storage memory real time in accordance with the auto sequence requirement.\n• Short, OCCP and OCDP function test for BMS protection board is provided (option)\n\nFEATURES\n• 5 digital V / A / W Meter.\n• High-speed measurement and communication transmission.\n• V.A.W. values can be displayed simultaneously.\n• Large LCD Display,setting values can be adjusted by rotary knob or push button.\n• OCP , OPP test function.\n• Must be configured in 3302F〔single channel mainframe〕\n 3302F mainframe provides the NTC simulation test function (Option), \n 3305F〔two channels mainframe〕or \n 3300F〔four channels mainframe〕and the mainframe with 150 sets Store / Recall memory.\n• Power ON status value can be set.\n• Flexible CC. CR, CV, CP, Dynamic and Short operation modes.\n• SHORT time setting and SHORT_VH, SHORT_VL setting function.\n• Protections against V, I, W, and °C.\n• Voltage meter display the polarity positive ('' +'')or negative (''- '')is selectable.\n• SYNC. Load ON function.\n• Optional Interface : GPIB,RS232,USB,LAN.\n• Support MPPT CC, CR, CV test function for solar panel\n• Function test for BMS protection board is provided (option)\n• New waveform generator plug in model 9923 adds user programmable battery discharge current waveform simulation to Prodigit DC Loads\n