EINHELL BT-BD 701 Bench Drill

Bench Drill BT-BD 701

With its comprehensive features and 630 W motor rating, the BT-BD 701 bench drill enables high-precision drilling for a wide spectrum of jobs.

Twelve speed settings from 220 to 2,450 min-1 permit optimum adjustment to the requirements imposed by the material and the bit used.

Using the robust scroll chuck the bit can be changed in a few seconds; an MK2 chuck permits the use of bits with a Morse taper for larger drilling diameters.

The drilling spindle of the BT-BD 701 runs with extreme precision thanks to its ball bearing and V-belt drive.

The speed is controlled through friction locking by a stepped belt pulley.

The torsion-resistant drill table is infinitely variable in height and can be tilted and swiveled without difficulty into the required working position.

A drilling depth stop with scale ring for single-handed adjustment enables high-precision, repeat drilling depths.

The sturdy foot of the BT-BD 701 is equipped with slots for fitting a vice.

High-grade rubberized handles and a folding chip guard provide a high level of safety while working.

The On/Off switch with zero-voltage release prevents the machine from starting up again unintentionally after a power failure.

Features:

1. 12 speed settings from 220 – 2,450 min-1
2. V-belt drive, speed setting with stepped belt pulley
3. Drilling spindle with ball bearings
4. Scroll chuck
5. MK2 chuck
6. Folding chip guard
7. Swiveling scale ring for precise drilling depths
8. Drill table can be tilted and swiveled
9. Including vise
10. Infinitely variable adjustment of table height
11. Stable foot with slots for vise fastening
12. ON/OFF switch with zero-voltage release
13. High-quality rubberized handles

Technical Specification: