GDS Gas Detector 15/30J-F1

Name: GDS Gas Detector 15/30J-F1
Brand: GDS Technologies

http://www.gds-technologies.co.uk

最后更新

价格:

征求报价

All Gas Types Available • Flexible output options • Addressable or stand alone • Hyper terminal communications rs232 line data and set up with 232 adapter • Data logging • Optional alarm relays • Robust and weather-proof The 30J enclosure has been designed to allow quick and easy access to its interior by adjustment of two allen screws, this factor is a major consideration when large system service and calibrations are being carried out. The detector is robust and weather-proof with improved response times due to the four mounting spacers allowing increased air movement around the detector these spacers also improve the mounting of the unit particularly on circular pillars typically found in carparks. S tandard 4~20mA signalling with CAN bus address enables the sensors to be networked via the GDS Combi control system or customer preferred monitoring system.

Share Product:

资料

Click for More

Power Supply - 15 to 30vDC 24v nominal
Outputs
3 wire - 4~20mA
4 wire - CAN bus
Relays (optional)
Low alarm S .P.C.O
High alarm S .P.C.O
Fault alarm S .P.C.O / overrange
Rating 0.5A @30vDC
Inhibit option during servicing
Logging
Addressable sensors only
Intervals - one minute to one hour
Storage - 2,880 readings
Temperature: -15˚C to 55˚C
Humidity: 0˚C to 99% RH - non condensing

DETECTOR HEAD
Type – F1 Hazardous area use
Data Sheet - Ref C105
Certification
ATEX / IECEX
Ingress Protection
IP63, + Universal fitting IP64
Material - Stainless Steel 316 S16
Weight - 166gms
Dimensions - Length 32mm, D ia 33mm
Sensor Inserts - 4 series
Electrochemical
Infra-red
Semiconductor
Pellistor-catalytic
PID
Accessories - Optional
Collector Cone + Universal Fitting
Universal Fitting (test gas applicator/spray deflector)
Water Shield - stainless steel
Flow Block - nylatron
Flow Block - stainless steel
Duct Mount Kit
Detector Head Weather Shield
F1 Sensor Thermal Jacket

JUNCTION BOX
Type - 30J S afe area use only
Deep box (D) Shallow Box (S)
Ingress Protection - IP64
Material - ABS Flame retardent FR 40 / Lid S crews M4SS
Finish - Signal White RA L 9003
Dimensions - 147 W x 145 H x 99 D mm
Weight - 380gms
Entries
Rear: 5-20mm knock outs
Bottom: 2x drill targets
Top and S ides: Not specified
Mounting
Standoffs - M4 or N o 8 screws
Drill at (C) when standoffs removed
Conduit box - drill at (A) 4.5mm
Surface mount box - drill at (B) 4.5mm
EU Design No. - 01359723-0001

规格

关键词	Gas Sensor Data Logger Weatherproof Alarm Relays Transmitters
品牌	GDS Technologies
来源	GB

首页

关于

商品目录

联系

GDS Gas Detector 15/30J-F1

Find Nearby Companies

Zoom in to view more information