OKS Lubricants

Pastes for easy assembly and dismantling

The structure of pastes corresponds in principle to that of greases. However, the share of solid lubricants is clearly higher. Thus a reliable lubricating, parting and corrosion protection effect is ensured even when used under extreme temperature and pressure conditions and aggressive media. Pastes are used at screw threaded connections as well as for pressing in pins and bolts, at gearwheels, chucks, hinges and plain bearings.

Oils with high-performance additives for reliable lubrication

Oils dissipate heat well from the lubricating point. In addition they have a notedly good creep and wetting behaviour. Oil lubrication is therefore often used at high temperatures or high speeds. Typical fields of application are gears, chains, friction bearings, hydraulic systems and compressors.

Greases for long-term lubrication under critical operation conditions

Greases consist of a base oil that is bound by a thickener (soap). The lubricant thus remains at the lubricating point, where it ensures continued effective protection against friction and wear and seals the lubricating point against external influences such as humidity and foreign matter. Greases are often used at roller and friction bearings, spindles, fittings, seals, guides but also at chains and gears.

Dry Lubricants the alternative for special application cases

Dry lubricants can be classified into solid lubricants in powder form, ceraceous sliding films and in bonded coatings containing solids. Bonded coatings are solid lubricants (usually MoS2, graphite or PTFE) that are incorporated into an organic or inorganic binder. In order to allow distribution of the bonded coating, a solvent which evaporates during the hardening or drying time is added. After thorough preparation of the surface, coating is carried out by means of immersion, spraying or painting.

Corrosion Protection for reliable preservation during storage and shipping

Maintenance Products for ongoing service

The chemotechnical maintenance products from OKS were developed especially for the complex requirements in maintenance and assembly applications. Whether for critical operating conditions like high-pressure loads and extreme temperatures or aggressive environmental factors like dust and corrosive media, the performance of maintenance products will always convince you.